Making a WiFi weather station with a color display

But alas, my display was without a wheelbarrow, and I was too lazy to do everything by hanging on wires. Of course, then it was necessary to put the prototype in order and arrange the design into the body.
Last step: soldered the wemos board to the display header. https://jiji.com.et/cars/toyota-hilux-2012 Decided! I order a whale.

Making a WiFi weather station with a color display

Comes in a good plastic box, here are its contents (photo from the site): I programmed according to the instructions. I got tired of opening Google with the current weather and forecast for the day, and while walking on Pinterest I found a ready-made design with instructions and ready-made software. After flashing I got a working prototype: I did not put wemos on the block, but soldered it close to the second board using comb racks. Next, I removed the black plastic pin holder from the soldered display header with a screwdriver: In the bins, I found a display based on ILI9341 and wemos, and I decided to make a station on a breadboard. I removed the SD card slot from the display, it is not needed, and it interferes with making the design as thin as possible. Front view:
In my case, the back board is the same size as the display board. I decided to assemble everything not according to the instructions, but in my own way.